Crafter's Companion Fall Glitter Paste and Stencil Kit

Using glitter paste with the stencil

1. Secure your stencil to your project (ideally placing tape at the top of the stencil to act as a hinge for Step 4).
2. Select your chosen glitter paste and use our palette knives to gently spread the paste through the stencil (do not press down too hard).
3. Use the edge of the palette knife to gently scrape away the excess paste from the stencil (this can be deposited back in the glitter paste pot and used again).
4. Remove all the tape securing the stencil except for the piece at the top that is acting as a hinge and carefully lift the stencil to check that the stenciled design has been achieved. If it has not, gently place the stencil back down, secure it again and repeat the process to apply more paste.
5. When completely happy with the stenciled design, carefully remove the stencil and allow the design to dry. Wash the stencil immediately in warm soapy water and ensure the lid is placed back on the glitter paste. In addition to ensuring the lid is put back on the paste tightly, also ensure the foil lid is put back down, or alternatively seal with cling film if the foil has ripped or been removed.