Luminess Replacement Stylus Kit

• 1 Luminess airbrush stylus - measures approx. 5-3/4"L x 2"W x 1/2"H
• 1 dropper
• 1 small wrench
• 1 protective case
• Stylus made of stainless steel with aluminum cover
• Clean with water after each use
• Designed in USA, assembled in China

To get the most out of your Luminess Air System, follow these tips:

• Watch the included how-to DVD and read the illustrated instructions book
• Have patience in learning how to use this fun system - after using two or three times, you will see application is much easier and faster, and helps result in a more flawless appearance
• Shake the foundation, or other bottle formulas, for about 10 seconds before opening and putting drops into the stylus
• Hold the stylus like you would a pen
• Use your index finger to control the lever throttle
• Do not pull back all the way on the stylus lever unless you are cleaning out the stylus with water. You need only pull the lever back about 1/4 to 1/2 of the way.
• Hold the stylus 6" to 8" from your face; holding the stylus too close to your skin will result in uneven, blotchy application
• Use even, steady motion while spraying so foundation goes on evenly and lightly
• A little goes a long way - beginners tend to spray heavily. Apply one light coat, wait several seconds until the coat dries, and then reapply if you desire more coverage.
• Clean stylus with a few drops of water using the airbrush cleaning bottle after each use